How To Find The Area Of Composite Figures

6 min read

Finding the area of composite figures is one of those geometry skills that looks intimidating on paper but becomes surprisingly simple once you break the shape down into pieces you already know. The secret is not memorizing a new formula; it is learning to see the familiar shapes hiding inside the complicated outline. A composite figure is simply a two-dimensional shape built from two or more basic shapes—rectangles, triangles, circles, trapezoids, or semicircles—joined together. Once you can spot them, the area of composite figures becomes a straightforward process of calculating a few small areas and combining them.

What Exactly Is a Composite Figure?

A composite figure (sometimes called a compound figure) is any plane shape made by combining simpler geometric figures. Now, think of a house-shaped drawing: a rectangle for the walls with a triangle for the roof. Or an L-shaped room in a floor plan, a running track made of a rectangle with two semicircles on the ends, or a garden bed shaped like a rectangle with a circular fountain cut out of the middle.

Because these shapes are not standard, you cannot plug their dimensions into a single formula. On top of that, instead, you rely on the area addition postulate, which states that if a figure is made up of non-overlapping parts, the total area equals the sum of the areas of those parts. That single idea is the foundation of everything that follows The details matter here..

The Core Strategy: Decompose, Calculate, Combine

Every composite figure problem follows the same three-step rhythm.

  1. Decompose the figure into basic shapes by drawing lines across it.
  2. Calculate the area of each basic shape using its own formula.
  3. Combine the results—usually by adding, but sometimes by subtracting.

There are two main approaches, and choosing the right one saves time and prevents errors.

The Addition Method

Use the addition method when the figure can be cleanly sliced into separate pieces that sit side by side. Think about it: draw a dashed line (or several) to divide the shape, then treat each region independently. This is the most common approach and the one most students find intuitive Simple, but easy to overlook. Practical, not theoretical..

Easier said than done, but still worth knowing.

The Subtraction Method

Use the subtraction method when the figure looks like a large shape with a piece removed—a hole, a notch, or a cut-out corner. Still, here you calculate the area of the whole outer shape first, then subtract the area of the missing part. Trying to slice a shape with a circular hole into rectangles usually creates awkward fragments, so subtraction is far cleaner.

A Step-by-Step Workflow That Always Works

Before touching a calculator, follow this checklist. It prevents the most common mistakes.

  • Redraw or trace the figure on your own paper so you can mark it up freely.
  • Label every given dimension and identify which ones are missing.
  • Find the hidden dimensions. This is where most errors happen. If a side of the whole figure is 12 cm and one segment is 7 cm, the remaining segment must be 5 cm. Use subtraction along edges to get to unknown lengths.
  • Choose your decomposition and draw the dividing lines clearly.
  • Write the formula for each piece before substituting numbers.
  • Add or subtract the pieces.
  • Attach square units (cm², m², in²) and round only at the very end.

Worked Example 1: An L-Shaped Figure

Imagine an L-shaped patio with an overall width of 12 m and an overall height of 10 m. The top-right corner is missing: that cut-out section measures 7 m wide and 6 m tall.

Method A — Subtraction. Treat the whole thing as a 12 m × 10 m rectangle The details matter here..

  • Full rectangle: 12 × 10 = 120 m²
  • Missing corner: 7 × 6 = 42 m²
  • Patio area: 120 − 42 = 78 m²

Method B — Addition. Slice the L into two rectangles with a horizontal line.

  • Bottom rectangle: 12 × 4 = 48 m² (the height is 10 − 6 = 4 m)
  • Top-left rectangle: 5 × 6 = 30 m² (the width is 12 − 7 = 5 m)
  • Total: 48 + 30 = 78 m²

Both methods give the same answer, which is a great self-check. If your two approaches disagree, you have almost certainly misread a dimension.

Worked Example 2: A Rectangle With a Semicircle

A window is shaped like a rectangle 10 cm wide and 6 cm tall, topped by a semicircle whose diameter matches the rectangle's width.

  • Rectangle area: 10 × 6 = 60 cm²
  • Semicircle radius: 10 ÷ 2 = 5 cm
  • Full circle area: π × 5² = 25π ≈ 78.5 cm²
  • Semicircle area: 78.5 ÷ 2 = 39.25 cm²
  • Total window area: 60 + 39.25 = 99.25 cm²

Notice the critical detail: the diameter of the semicircle equals the width of the rectangle, so the radius is half of that. Students frequently forget to halve the diameter, which quadruples the error Worth keeping that in mind..

Worked Example 3: Cutting a Hole Out of a Shape

A square tile measures 14 cm on each side and has a circular hole with a radius of 3.5 cm drilled through the center.

  • Square area: 14 × 14 = 196 cm²
  • Circle area: π × 3.5² = 12.25π ≈ 38.47 cm²
  • Remaining material: 196 − 38.47 ≈ 157.53 cm²

This is a classic subtraction problem. The phrase "cut out," "removed

Worked Example 4 – A Triangle Removed from a Rectangle

A rectangular board is 15 cm long and 8 cm high. A right‑angled triangle with a base of 6 cm and a height of 4 cm is cut out from the lower‑left corner, as shown in the sketch.

  1. Identify the pieces – The board can be thought of as the whole rectangle minus the triangular piece.
  2. Compute each area
    • Rectangle: 15 × 8 = 120 cm²
    • Triangle: ½ × 6 × 4 = 12 cm²
  3. Subtract – 120 − 12 = 108 cm².

If you prefer to add, split the rectangle into two smaller rectangles that avoid the triangle:

  • Bottom‑left rectangle (the part that remains after the cut): 6 × 4 = 24 cm²
  • Top rectangle (the rest of the board): 15 × 8 − 6 × 4 = 120 − 24 = 96 cm²

Adding 24 + 96 also yields 108 cm², confirming the result.


Worked Example 5 – A Re‑entrant (Concave) Polygon

A garden bed is bounded by an L‑shaped outline. The outer dimensions are 20 m wide and 12 m tall. Inside the L, a rectangular flower box 5 m × 3 m intrudes, reducing the usable planting area.

  1. Break the L into two rectangles – a vertical strip 20 × 5 m and a horizontal strip 15 × 7 m (the overlap of 5 × 3 m is counted twice, so subtract it once).
  2. Calculate each piece
    • Vertical strip: 20 × 5 = 100 m²
    • Horizontal strip: 15 × 7 = 105 m²
    • Overlap (the 5 × 3 m box): 5 × 3 = 15 m²
  3. Combine – 100 + 105 − 15 = 190 m².
  4. Subtract the flower box – 190 − 15 = 175 m² of actual planting space.

The key step was to draw the dividing lines clearly before writing any formulas; this prevents double‑counting or missing a region.


A Final Checklist (Condensed)

  • Sketch the figure yourself and label every known length.
  • Spot missing lengths by using simple subtraction or addition along edges.
  • Choose a decomposition that yields shapes with which you are comfortable (rectangles, triangles, circles, etc.).
  • Write the appropriate formula for each piece before plugging in numbers.
  • Perform addition or subtraction of the pieces, keeping track of signs.
  • Attach the correct units and round only at the very end.

Conclusion

Mastering area calculations hinges on a systematic approach

Coming In Hot

Fresh Out

A Natural Continuation

Don't Stop Here

Thank you for reading about How To Find The Area Of Composite Figures. We hope the information has been useful. Feel free to contact us if you have any questions. See you next time — don't forget to bookmark!
⌂ Back to Home