Unit 7 Geometry Homework 13 Dilations

4 min read

Unit 7 Geometry Homework 13 Dilations: A Complete Student Guide

Dilations are one of the most fascinating topics in a geometry course, and Unit 7 Geometry Homework 13 on dilations is usually the assignment where students stop memorizing rules and start truly seeing geometry come alive. A dilation slides nothing, flips nothing, and rotates nothing — instead, it resizes a figure while keeping its shape perfectly intact. Here's the thing — if you have ever zoomed in on a photo and noticed that everything stays proportional, you have already witnessed a dilation in action. This guide walks you through every concept your homework will test: the definition, the scale factor, the center of dilation, coordinate rules, common traps, and a step-by-step strategy you can reuse on every problem.

What Is a Dilation in Geometry?

A dilation is a transformation that produces an image that is the same shape as the original figure but a different size. The original figure is called the pre-image, and the resized result is called the image. Unlike translations, reflections, and rotations, a dilation does not produce a congruent figure — it produces a similar figure.

Three vocabulary terms matter here:

  • Center of dilation — the fixed point from which the figure is enlarged or reduced.
  • Scale factor (k) — the multiplier that determines how much bigger or smaller the image becomes.
  • Similarity — the relationship between two figures whose angles are equal and whose sides are proportional.

Every point of the pre-image moves along a straight line that passes through the center of dilation, and the distance it travels depends entirely on the scale factor.

Understanding the Scale Factor

The scale factor k is the heartbeat of every dilation problem. Here is how to interpret it:

  • If k > 1, the image is an enlargement (bigger than the original).
  • If 0 < k < 1, the image is a reduction (smaller than the original).
  • If k = 1, the image is congruent to the pre-image (no change).
  • If k is negative, the image flips to the opposite side of the center of dilation while still resizing.

Take this: a scale factor of 3 triples every distance from the center, while a scale factor of ½ cuts every distance in half. Notice that the scale factor is a multiplicative idea, not an additive one — that single insight prevents the most common homework error, which we will cover later And that's really what it comes down to. That's the whole idea..

How to Perform a Dilation on the Coordinate Plane

Most homework problems place the center of dilation at the origin (0, 0), because the rule becomes beautifully simple:

(x, y) → (kx, ky)

That is, multiply each coordinate by the scale factor.

Example 1: Enlargement Centered at the Origin

Suppose triangle ABC has vertices A(2, 3), B(4, 1), and C(1, 5), and you are asked to dilate it with k = 2.

  1. A(2, 3) → A′(4, 6)
  2. B(4, 1) → B′(8, 2)
  3. C(1, 5) → C′(2, 10)

Plot the new points, connect them, and you have a triangle twice as large, with identical angle measures And it works..

Example 2: Reduction with a Fractional Scale Factor

Using the same triangle with k = ½:

  1. A(2, 3) → A′(1, 1.5)
  2. B(4, 1) → B′(2, 0.5)
  3. C(1, 5) → C′(0.5, 2.5)

The image sits closer to the origin, exactly half the size of the pre-image.

Example 3: When the Center Is Not the Origin

If the center of dilation is a point like (1, 1), use a three-step process:

  1. Translate the figure so the center moves to the origin.
  2. Apply the scale factor rule (kx, ky).
  3. Translate back to the original center location.

This method works for any center, and understanding why it works matters more than memorizing it, because it shows that a

dilation is a transformation defined by distances from a point, not by coordinates on a grid. The origin simply happens to be the point where the arithmetic is easiest.

Written out in full, the rule for a center at (a, b) is:

(x, y) → (a + k(x − a), b + k(y − b))

Example 3, Finished: Center at (1, 1) with k = 3

Applying that formula to the same triangle ABC:

  • A(2, 3) → (1 + 3(1), 1 + 3(2)) = A′(4, 7)
  • B(4, 1) → (1 + 3(3), 1 + 3(0)) = B′(10, 1)
  • C(1, 5) → (1 + 3(0), 1 + 3(4)) = C′(1, 13)

Check your work with one reliable test: the center, the original point, and the image point must always lie on the same straight line, and the distance from the center to the image must be exactly |k| times the distance from the center to the pre-image Surprisingly effective..

What Stays the Same and What Changes

A dilation changes size but never shape, which is why it produces similar figures:

  • Angle measures are unchanged.
  • Side lengths are multiplied by k, so the perimeter is multiplied by k.
  • Area is multiplied by k², since area grows in two directions at once.

That last bullet is the source of many surprises. If triangle ABC above has an area of 7 square units and you dilate it by k

What Just Dropped

Just Published

Related Territory

Still Curious?

Thank you for reading about Unit 7 Geometry Homework 13 Dilations. We hope the information has been useful. Feel free to contact us if you have any questions. See you next time — don't forget to bookmark!
⌂ Back to Home